Back to Top Skip to main content Skip to sub-navigation

Walter Reed, VA focus on joint efforts in 3D medical application

Image of Three physicians wearing masks; one sitting at a desk, two standing. Peter Liacouras, Ph.D., director of the 3-D Medical Applications Center at Walter Reed National Military Medical Center, explains to physicians from the Washington DC Veterans Affairs (VA) Medical Center the capabilities of the 3D MAC at WRNMMC. (Photo by Bernard Little, Walter Reed National Military Medical Center.)

Recommended Content:

Research and Innovation | Health Care Technology | Department of Defense/Veterans Affairs Program Office

Leadership from the Washington, D.C. Veterans Affairs Medical Center visited Walter Reed National Military Medical Center last month to acknowledge the new Joint Incentive Fund (JIF) award between the two centers.

The JIF award focuses on the Department of Defense/VA 3D Printing Consortium for Medical Applications. The total JIF award was for more than $8.8 million with the WRNMMC/3D MAC portion at over $4.1 million for a project length of two years, according to Dr. Peter Liacouras, director of the services for WRNMMC’s 3D Medical Application Center.

In 2002, the 3D MAC opened at the former Walter Reed Army Medical Center (WRAMC), a predecessor of WRNMMC with the former National Naval Medical Center (NNMC), stated Liacouras, who joined the 3D MAC team in 2006. He added that in the late 1990s, an individual at NNMC was doing some 3D printing as well.

In 2007, the Naval Postgraduate Dental School (NPDS), at the then NNMC, started to invest in 3D printing for dental prosthetics, and then in 2011 with the Base Realignment and Closure law, the 3D MAC was relocated from the closing WRAMC to the new WRNMMC, Liacouras explained.

According to Military Health System (MHS) officials, the JIF was established under Section 721 of the FY 2003 National Defense Authorization Act “to provide seed money and incentives for innovative DOD/VA joint sharing initiatives to recapture Purchased CareThe TRICARE Health Program is often referred to as purchased care. It is the services we “purchase” through the managed care support contracts.purchased care, improve quality and drive cost savings at facilities, regional and national levels. JIF is only designated for use by the Veterans Health Administration (VHA) and Defense Health Agency (DHA) entities for direct medical sharing initiatives or for services or systems that facilitate DOD/VA interoperability.”

“Telehealth and 3D printing in health care settings are the wave of the future,” VA Secretary Robert Wilkie recently stated. In March, VA activated its 3D printing network to test 3D designs of medical equipment used by the nation’s health-care providers to combat the COVID-19 pandemic. This effort included developing 3D masks and other critical personal protective equipment (face shields, masks and ventilators) to bolster the nation’s fight against COVID-19.

Group of men, wearing masks, standing in front of a building
Walter Reed National Military Medical Center Director Army Col. (Dr.) Andrew Barr (fifth from left) and Director of the Washington DC Veterans Affairs Medical Center retired Army Col. Michael Heimall (sixth from left), along with members of their leadership team, met on Oct. 20 at WRNMMC to acknowledge the multi-million dollar Joint Incentive Fund award between the two centers focused on jointly advancing 3D medical technology for Military Health System and VA beneficiaries. (Photo by Bernard Little, Walter Reed National Military Medical Center.)

The VA is the first integrated health care system in the country to establish a national 3D Printing Network, allowing its health-care staff to share ideas, resources and best practices to deliver quality care to patients throughout its enterprise, according to VA officials. This collaboration will include the 3D at WRNMMC.

“The VA and DOD share a vision to provide a centralized system of services to service members that will benefit them throughout a lifetime,” Liacouras stated. “This system is created through an interdependent network of partnerships and establishes a national model for excellence, quality, access, satisfaction, and value.”

He explained the vision is supported by three key goals:

  • Delivering comprehensive benefits and services through an integrated client-centric approach that anticipates and addresses client needs.
  • Providing a patient-centered health-care system that delivers excellent quality, access, satisfaction, and value, consistently across the departments.
  • Establishing a national model for the effective and efficient delivery of benefits and services through joint planning and execution.

Liacouras further added that the JIF proposal sought funding to unify field-level DOD and VA hospital 3D printing efforts into a scalable DoD/VA 3D Printing Consortium through joint planning and execution.

At WRNMMC, the five-person 3D MAC team uses digital technology combined with additive manufacturing to provide medical-specific models and devices for MHS beneficiaries. The team produces custom implants, medical simulators, surgical guides, orthotics, prosthetic devices and patient-based anatomical models. They also assists in virtual-treatment planning, image capturing and research projects throughout DOD. The 3D MAC at WRNMMC is the DOD’s largest 3D medical printing center with a team that serves not only WRNMMC beneficiaries, but also other military facilities, federal entities and worldwide allied medical institutions.

This JIF award will allow WRNMMC to update and purchase multiple 3D printers and other digital technology; register with the FDA as a medical manufacturer; and increase training within WRNMMC and DOD.

Liacouras, explained to the capabilities of the center, elaborating on its role in four main areas of reconstructing patient radiological images to produce medical models and devices; developing new, low cost, high fidelity simulation models for resident training; designing and manufacturing unique limb prosthetic attachments for specialty activities; and producing devices and assisting in numerous research projects.

The 3D MAC team produces more than 1,000 products annually in support of military medicine, according to Liacouras.

Liacouras explained how the 3D MAC’s expertise, combined with collaborations across hospital departments and within DOD provides physicians and other professionals with the opportunity to use the state-of-the-art technology to positively impact the quality of life for military members and their families.

You also may be interested in...

Month of the Military Child 2021 Infographic

Publication
3/30/2021

This infographic from the Military Kids Connect program supports Month of the Military Child 2021 and promotes the theme Celebrating the Mighty.

Recommended Content:

Health Care Technology | Mobile Apps

Month of the Military Child Toolkit 2021

Publication
3/30/2021

This toolkit from the Connected Health Branch's Military Kids Connect program supports the celebration of Month of the Military Child 2021.

Recommended Content:

Health Care Technology | Mobile Apps

Health Technologies for Service Members and Families

Publication
3/8/2021

This guide from the Connected Health Branch provides a brief overview to service members and military families on the digital health tools available to support them.

Recommended Content:

Health Care Technology | Mobile Apps | Telehealth Program

Health Technologies for Patients

Publication
3/8/2021

This chart from the Connected Health Branch gives health care providers an easy reference to identify digital health tools to support MHS beneficiaries.

Recommended Content:

Health Care Technology | Mobile Apps | Telehealth Program

Guide to Digital Health Technology

Publication
3/8/2021

This guide from the Connected Health Branch provides a brief overview of digital health technology available from the Military Health System.

Recommended Content:

Health Care Technology | Mobile Apps | Telehealth Program

Prescription for Connected Health Interactive

Publication
3/8/2021

This interactive prescription sheet from the Connected Health Branch enables providers to recommend MHS digital health technology to their patients.

Recommended Content:

Health Care Technology | Mobile Apps | Telehealth Program

TRL Assessment 2020

Publication
9/22/2020

Document that describes the technology readiness level of an agency

Recommended Content:

Health Care Technology

Provider Resilience Toolkit Overview

Publication
9/17/2020

Overview of the digital health resources and tools available from the Defense Health Agency supporting provider resilience.

Recommended Content:

Health Care Technology

Provider Resilience Self Care Guide

Publication
9/17/2020

Tips and recommendations for health care providers on self-care to promote resilience and reduce stress.

Recommended Content:

Health Care Technology

Provider Resilience Three Steps to Self Care

Publication
8/6/2020

This infographic outlines three primary steps in supporting self care and resilience in health care providers.

Recommended Content:

Health Care Technology

TBI Hot Topics Bulletin May 2020

Publication
8/4/2020

Are you a busy health care provider? Not enough time to keep up with research? Stay informed with the TBI Hot Topics Bulletin. We track the latest TBI scientific studies, advances, and discoveries most relevant to health care providers. This issue covers the first quarter of calendar year 2020.

Recommended Content:

Traumatic Brain Injury Center of Excellence | TBI Educators | TBI Provider Resources | TBICoE Research | Traumatic Brain Injury | TBI Resources | Research and Innovation

Virtual Health Patient FAQs

Publication
6/19/2020

Frequently asked questions for patients on the use of virtual health technology to receive health care.

Recommended Content:

Telehealth Program | Health Care Technology

Virtual Health Myth vs Fact

Publication
6/19/2020

Review of the myths and facts on the use of virtual health technology to deliver health care.

Recommended Content:

Health Care Technology | Telehealth Program

Virtual Health Provider FAQs

Publication
6/19/2020

Frequently asked questions for health care providers on the use of virtual health technology in clinical practice.

Recommended Content:

Health Care Technology | Telehealth Program

Adobe Connect Guidance for Patients

Publication
4/1/2020

A brief guide for MHS beneficiaries on best practices in using Adobe Connect for virtual health care visits with their provider.

Recommended Content:

Health Care Technology | Mobile Apps | Telehealth Program
<< < 1 2 3 > >> 
Showing results 1 - 15 Page 1 of 3
Refine your search
Last Updated: August 09, 2022

DHA Address: 7700 Arlington Boulevard | Suite 5101 | Falls Church, VA | 22042-5101

Some documents are presented in Portable Document Format (PDF). A PDF reader is required for viewing. Download a PDF Reader or learn more about PDFs.